Client Antenna

Special Closeout Price: from 148 Euros! 11 Mbps outdoor Client device with integrated 18 dBi antenna. Power-over-Ethernet solution makes easy installation outside. Ideal for connecting homes or offices to a network by connecting to an access point located up to 2 km away. New LITE version - cheaper passive PoE - satisfactory for most applications.

Works with all computer operating systems. It is configured and controlled using the web browser on the connected computer. We recommend you use an Ethernet Protector with this equipment, to protect from electrical surges.

The Client Antenna is wireless device integrated with an 18 dB antenna with power supplied by an ethernet cable. Client Antenna is designed for outdoor application and is based on TCP/IP protocols. Client Antenna is configured over ethernet cable with a control utility. Wireless components work in the 2.4 Ghz band, conform to the 802.11b standard, and support infrastructure or Ad-Hoc modes.
Download Manual

Manufacturer	Ferimex IT
Data transfer	1 Mbps, 2 Mbps, 5.5 Mbps, 11 Mbps, Auto Full speed
Communication	Half Duplex
Chipset	Atmel
Standards	Wireless LAN, 802.11b, WiFi Compliant, Ethernet 802.3
Modulation	DBPSK, DQPSK, CCK
Spreading	DSSS (Direct Sequence Spread Spectrum)
Output power	18 dBm
Receiving sensitivity	min. - 81dBm na 11 Mbps
Frequency range	2.4000 - 2.4835 GHz
Number of channels	13
Security	40-bit/128-bit WEP Data Encryption
Interface	10Base-T, RJ 45
Power	over ETH cable, 48V
Temperature Range	-25/+40 C
Humidity	max. 95% non-condensing
Warranty	12 months
Ethernet	10 Mbit
Management	web interface
Shipping Weight	3,01 kg

Power supply
Power and signal are supplied through ethernet cable to the device by a Power-Over-Ethernet power supply (PoE injector), which is included free.

New! Now we offer two versions of this product:

Standard version - Uses Active PoE based on IEEE 802.11af standard. Offer stable power with Ethernet cables long up to 100 meters.

LITE version - Uses Passive PoE which uses free wires of ethernet cable to send power to outdoor device. This is applicable with Ethernet cable long up to 20 meters.

Maximum length of Ethernet cable depends on cable quality. We recommend to use Cat 5e cable.

Infrastructure mode
The equipment in infrastructure mode can connect to the majority of access points working in AP mode with standard 802.11 b. This mode is appropriate especially for Internet connections, and also for other networks as an end-user, for printer sharing etc.

Ad-Hoc
Ad-Hoc mode is used for computers connected to one subnetwork (peer-to-peer). It has a fixed communication channel and "ssid" (identification name of network) which should be unique in the communication area to keep clear of interference.