Outdoor AP/Client 11g 2.0

The Outdoor AP/Client 11g is a wireless device which can be installed and connected very easily to a computer and to power by an ethernet cable. It should be attached outside directly to an appropriate access point antenna or client antenna, sold separately. A typical use is to set up an access point, or to connect a customer to an internet network. It uses a TCP/IP protocol base. The AP is easily configured by running the utility program in the browser (Internet Explorer 5.5 or higher). The radio parts of this device work in AP, AP Client, AP Repeater, or Bridge modes. It works at a distance up to 15 km for point-to-point connections with an appropriate antenna attached. The radio parts work in the ISM range of 2,4GHz based on the 802.11g (54 Mbps) standard. The device can also be run in 802.11b (11 Mbps) mode. The Outdoor AP/Client 11g is intended for outdoor applications in all types of rain, snow, cold, and heat.

HARDWARE INTERFACE Chipset: Realtek Memory: 2M Flash + 8M SDRAM Interface: 1xRJ45 LAN port LED: Power, LAN, Act(WLAN) Reset: Reset to default setting (hold the reset button after 6 sec) Connector: N-type female connector   RADIO CHARACTERISTICS Standard: IEEE 802.11g/b Frequency Bands: ISM-Band 2.412~ 2.484GHz Modulation Tech: 802.11g: OFDM   802.11b: CCK,DQPSK, DBPSK Media Access Protocol: CSMA/CA with ACK Transmit Power: 802.11b 17dBm, 802.11g 13.5dBm Receive Sensitivity: 802.11b -80 dBm@8%, 802.11g -68 dBm@10% Data Rates: 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps   802.11b: 11, 5.5, 2, 1Mbps Operating Range: 802.11b: 11Mbps Up to 300m (Outdoor), 35-100m (Indoor)   54Mbps up to 50m (Outdoor), 30m (Indoor)   SOFTWARE FEATURES Operating mode: AP, AP Client, WDS(Repeater) Security: 64/128bit WEP, WPA, WPA2   802.1x Management: Web-based management   PHYSICAL & ENVIRONMENTAL Dimension: 118x75x25mm (LxWxH) Temperature: -25~50 degree(Operation) Humidity: 5~90% Non-condensing   POWER SUPPLY Power Adapter: DC 7.5V   CERTIFICATION   FCC class B; CE Mark   PACKAGE CONTENTS . Outdoor AP/Client 11g . Multi-language Quick Installation Guide . Power Over Etnernet Injector . CD-ROM (QIG, User Manuel)   SHIPPING WEIGHT   2,0kg Antenna sold separately. Please see compatible antennas. Power supply Power and signal are supplied through ethernet cable to the Outdoor AP/Client 11g by a Power-Over-Ethernet power supply (PoE injector), which is included free. New! Now we offer two versions of this product: Standard version - Uses Active PoE based on IEEE 802.11af standard. Offer stable power with Ethernet cables long up to 100 meters. LITE version - Uses Passive PoE which uses free wires of ethernet cable to send power to outdoor device. This is applicable with Ethernet cable long up to 20 meters. Maximum length of Ethernet cable depends on cable quality. We recommend to use Cat 5e cable. AP mode AP mode provides access for the majority of wireless stations that comply with 802.11g standards. This mode is appropriate for building points of presence for internet access. AP Client mode In AP Client mode, the device can connect to other Outdoor APs or other devices using Atheros, Atmel, Broadcom, or Prism chipsets in AP mode. AP Client mode is approriate for use at a client or end-user, to connect to the network. AP Repeater mode This mode allows the AP to keep the AP function role and at the same time perform communication with other 802.11g access points to establish and extend your Wireless Network coverage. Wireless Bridge mode This mode allows the connection of one or more remote LANs to a central LAN.