Outdoor Multi-Router 1-1

PPoE server, PPoE client static routing RIP, OSPF, BGP routing bridging and bonding of interfaces Network Address Translation packet filter stateful firewall DNS cache DHCP client/server/relay web-based hotspot function IPsec UPnp TFTP Server Radius server MLPS VLPS simple queues and queue tree plenty of diagnostic tools and many others

Manufacturer Ferimex IT Purpose multi-function router Software MikroTik RouterOS™ Level 4 Processor 300MHz MIPS Ethernet LAN 1x 10/100Base-T Wireless port 1x 2,4 Ghz/5Ghz 802.11a+b+g Chipset Atheros AR5414 Output Power/ Receive Sensitivity   IEEE 802.11a: 17dBm/-88dBm @ 6Mbps   13dBm/-71dBm @ 54Mbps IEEE 802.11b: 19dBm/-95dBm @ 1Mbps   19dBm/-90dBm @ 11Mbps IEEE 802.11g: 18dBm/-90dBm @ 6 Mbps   15dBm/-73dBm @ 54Mbps Connector 1x SMA reverse polarity Power supply POE, 802.3af (LITE version: Passive PoE) Warranty 2 years Temperature range -20 to +50°C ( operating ) Humidity of surroundings max. 95% (non-condensing) Download the Installation manual, Configuration manual or Quick Guide how to configure point-to-point connection step by step.	Outdoor Use The Ferimex Outdoor Multi-Router 1-1 is designed for outdoor use. It resists all weather conditions and can be used in a wide temperature range from -25°C to +50 °C.
Power supply Power and signal are supplied through ethernet cable to the device by a Power-Over-Ethernet power supply (PoE injector), which is included free. New! Now we offer two versions of this product: Standard version - Uses Active PoE based on IEEE 802.11af standard. Offer stable power with Ethernet cables long up to 100 meters. LITE version - Uses Passive PoE which uses free wires of ethernet cable to send power to outdoor device. This is applicable with Ethernet cable long up to 20 meters. Maximum length of Ethernet cable depends on cable quality. We recommend to use Cat 5e cable.
Ports The Ferimex Outdoor Multi-Router 1-1 has 1 ethernet port and 1 WLAN port. The Ethernet Port is compatible with IEEE 802.3af Power Over Ethernet. The WLAN ports can be configured for 2,4 Ghz or 5Ghz frequency bands! You can use any of the following operating modes: ap, bridge, nstreme dual, station, wds, alignment only. We recommend to use 2-meter Pigtail N/M - SMA reverse polarity to connect the device with antennas. The recommended antennas are: 5Ghz: Antenna Omni V 5G Antenna FX 5G-24 Antenna FX 5G-27 2,4Ghz: Antenna Omni V Antenna ISM 24 HP other directional or sectorial antennas for 2,4 Ghz We recommend you use an Ethernet Protector with this equipment, to protect from electrical surges.
Dimensions
Applications Thanks to the number of ethernet and wireless interfaces, the Outdoor Multi-Router can be used in many different situations. These are a few examples: - An access point with direct connection to the backbone. The directional antenna connected to one WLAN port supplies the connection to the backbone network. The other WLAN port connected to the omnidirectional antenna supplies last-mile connections to the customer. - A relay point with a single device and two directional antennas. In all cases you can use the ethernet ports to connect the Outdoor Multi-Router to another device or to a customer. This device also offers QoS functions. Due to limitations of the processor this device is not suitable for extensive traffic shaping. But you can use it to manage the traffic of a few customers. We offer MikroTik RB 1000 for managing traffic from many customers.
Configuration The device can be fully configured using Winbox Graphical configuration interface. The Winbox interface runs on any Windows operating system. You can download the Winbox application directly from the built-in web server of the device. The device can be also be configured by the command prompt available through telnet, SSH or MAC telnet. The web interface allows basic configuration and nice visualization of graphs for different parameters. WinBOX configuration interface: Enhanced web graphing: Web management and configuration: